Adding new hard drive causes windows not to start now
ok ill be as specific as possible here
ive always had a few hard drives in my computer at any one time
a few days ago i was having problems with my windows 7 install that i put down to installing while i had all my hard drives connected at the time of install.
so 2 days ago i decided to start fresh again with a windows 7 ultimate 64 bit.
i also bought a new OCZ SSD 64gig just for my OS.
i disconnected all my hard drives except the SSD and completed a full install of windows 7 and everything worked fine first go again.
i then started shutting my computer down and adding one hard drive at a time and re booting and making sure the drive letters came back how i have had them over my previous builds and changing them were nessisary.
i installed my 5 hard drives in this matter and the computer restarted fine and all was perfect untill!
hard drives installed
1.
SSD 64gb
2.
1.5TB storage
3.
1.5TB storage
4.
320GB movies
5.
320GB games
i copied everything of hard drive 4.
movies(only movies and music files) onto hard drive 3.
then i removed hard drive 4 and replaced it with a brand new 1.5TB hard drive and restarted the computer
the computer started fine and once loaded windows i coppied the movies and music back to the new 1.5TB hard drive.
now i had
hard drives installed
1.
SSD 64gb
2.
1.5TB storage
3.
1.5TB storage
4.
1.5TB movies
5.
320GB games
this is were the problem started.
i rebooted my computer and it would not start.
it gets to the realteck message and just a cursor flashes and stays like this permanently.
if i remove the sata cable from the back of the hard drive 4 the computer starts fine
i can plug the cable back in just before the windows screen comes up and the hard drive works fine and is accesable and everything.
but leaving it plugged in during the boot the computer wont start at all
things i have tried, i have made sure all my boot priorities point to the SSD drive
i have turned of all other boot devices and only have the hard drive with the OS selected
ive made sure all the drive letters are correct on each drive
ive tried booting with the windows 7 CD in and i get to the repair section and click on the start up repair tool, it recconises their is a problem but informs me it cant be fixed automaticly and asks if i want to send the info to microsoft (wich i do).
this is really got me this one any help will be wondefull and thanks in advance
just incase ill leave my system specs
EVGA X58 mobo
INTEL i7 940
6GB corsair ram
all the hard drives you know
1000 watt PSU
2 X PALIT 295 GTX but SLI is not connected at the moment
Solutions to the Problem Adding new hard drive causes windows not to start now
Download Error Fixer for Free Now
Hi AUST_DeVinE,
· Please provide us the exact error message you are receiving when you plug in the SATA cable?
· After you plug in the hard drive are you able to boot in safe mode?
Check if you are able to boot in safe mode.
Link:
Start your computer in safe mode:
http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
1. Run chkdsk on this hard drive, follow the below steps and check if it helps:
i. Connect the external hard drive
ii. Boot the computer in Windows recovery environment, you may refer the below link:
What are the system recovery options in Windows 7?
http://windows.microsoft.com/en-us/windows7/What-are-the-system-recovery-options-in-Windows-7
iii. Run chkdsk,
Here are the steps to perform chkdsk:
i. In the command prompt window, type the following command and press enter Chkdsk /R X:
ii. Note: In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
iii. Press Y when you are prompted to check the disk the next time that the system restarts.
iv. Restart the computer.
Note: During the restart process, Windows checks the disk for errors, and then Windows starts.
Link you may refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714(WS.10).aspx
2. You may even format the hard drive and check if it helps, refer the below link for the same:
Formatting disks and drives: frequently asked questions:
http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions
3. Even make sure you check for firmware updates and for system BIOS updates
For firmware updates and for system BIOS updates, contact the manufacturer of the hardware in the computer, visit the following Web site:
http://support.microsoft.com/gp/vendors/en-us
Even verify that the system BIOS correctly detects the hard disk
For information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.
BIOS DISCLAIMER: Modifying BIOS/complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly.
Microsoft cannot guarantee that any problems resulting from the
configuring of BIOS/CMOS settings can be solved.
Modifications of the settings are at your own risk.
Thanks and Regards:
Samhrutha G S - Microsoft Support.
Visit our Microsoft Answers Feedback Forum and let us know what you think.
Make Sure that your Hardware Meets the System Requirements
Microsoft Windows Requirements :
- 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
- 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
- 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
This error can be due to some configuration requirements for you system. If your PC hardware is not up to par, then make sure you upgrade where necessary before continuing.
Another Safe way to Fix the Problem: Adding new hard drive causes windows not to start now:
How to Fix Adding new hard drive causes windows not to start now with SmartPCFixer?
1. Click the button to download SmartPCFixer . Install it on your system. Run it, and it will scan your system. The junk files will be shown in the list.
2. After the scan is done, you can see the errors and problems which need to be fixed.
3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.
Related:
How to Fix - 64g ssd with a 500g regular drive?,
Allow Unhide Rows in Protected Workbook [Solved],
[Solved] Get in Excel 2007 data from Access 2007 out of self-built Queries,
[Solution] How can I temporarily disable 'service manager' to install Adobe flashplayer?,
[Anwsered] When I try to watch a flash video, I am told occasionally that I don't have Adobe Flash.,
Solution to Error: Black screen during boot sequence,
[Solved] Can't restore Windows 7 64-bit from external hard drive,
How to Fix - IE 11 Enhance Protect Mode reset issue with add-on's?,
Solution to Error: Internet Explorer 9 update/install error - Error Code 80092004,
Upgrading to IE 8 causes cookies to get deleted when starting IE [Anwsered],
Solution to Problem: All programs try to start from windows component
,
Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,
How to Fix Error - Getting an error "not connected to the internet" while trying to install Samsung Kies?
,
How to Fix - Internet Explorer shuts down and reopens tab when attaching to email or uploading files.?
,
Fast Solution to Problem: Sending Error Message
,
[Anwsered] Thinkpad 8611 Boot,
How to Resolve - Svchost Helper?,
Fast Solution to Problem: L30 101 Driver Windows 7,
Troubleshooter of Error: Io Device,
How to Fix Error - Dell Laptop Code 39?Read More:
Solution to Problem: Additional log on information may be required. Click to open your browser after running Windows Updates today. 11\/13\/12,
advent modena laptop built-in webcam not working,
How to Resolve - aero opening/closing animation?,
Troubleshoot:add space after 6th letter of combine name in one cell ony and one column only.,
[Anwsered] Adobe Flash and Reader Download with DLM does not work,
a file called mDNSResponse.exe. is causing bonjour not to operate properly,what should I do?,
A QUESTION USING THE "IF'S" Formula.,
A continuos flashing window with which title is C:Windows\System32\cmd.exe, and has the following message: The syntax of the command is incorrect.,
Acrobat compatibility issue and you tube problems____,
ActiveX on IE 9 not loaded
